adb shell cmgs AT command in pdu mode on Redmi 7 not working
I run these commands: cat /dev/smd7 & echo “AT+CSCS=”GSM”;r” > /dev/smd7 cat /dev/smd7 & echo “AT+CMGF=0;r” > /dev/smd7 cat /dev/smd7 & echo “AT+CMGS=24;r” > /dev/smd7 Then …
Tag: at-command
Possible to echo the result of an AT command through router?
So I am trying to capture the result of an AT command that is sent to a module through a router. So far, I can get something if I open two telnet sessions into the router. On one telnet session, I …
XBee Linux Serial Port on Raspberry Pi
I have 2 Adafruit XBee 2 Modules each connected with 1 FTDI cable (ttyUSB0 and ttyUSB1)to the Raspberry Pi via a USB hub. I configure both XBee modules independently to be on the same PAN and then I …